‍‍‍‍

LogpileIn fact, the moisture content itself is relatively high. If we cannot handle it reasonably, the result will be rot or deformation. We can often see a lot of good wood, but it is actually inseparable from early protection. Next we have to take a look at our How to deal withLogpileAspects of paint job.

we know actuallyLogpileIt needs to be sprayed so that there will be no deformation. So how can we spray the paint evenly? First we need to color it, and then apply the primer to the topcoat. In fact, the process from spraying the primer to the topcoat requires The frosting process is inside. There are many kinds of paints we choose, but the better one is NC paint. But it is expensive and many manufacturers will choose other paints instead. Also, when painting, it must be done in a dust-free workshop. Because the air contains There is too much dust. If we can't control it well, we will spray out very uneven wood.

The above is what the editor tells you about the process of wood spray painting and how to better spray paint that we are satisfied with. Secondly, the editor wants to say that we are a long-term sales company.LogpileOther wood manufacturers. New and old customers in need are welcome to contact us at any time!

‍‍It's like this. If used directly as underwater construction or river wooden piles, fir piles will have better anti-corrosion performance, but because it is not like this, manyLogpileThere is even a long period of transportation and storage before use and construction. During this period of time, in fact, becauseLogpileContinuous exposure to sunlight and air will make it more susceptible to decay.

Therefore, in storage and transportationLogpileWhen doing so, be sure to pay attentionLogpileAnti-corrosion, including some watering, the use of chemicals, or the improvement of storage conditions, etc., all need to be done well.‍‍

‍‍‍‍