revetment cedar piles

revetment cedar pilesSince hammering is used during construction, there is a strong squeezing effect around the pile body, which increases the density of the soil layer within a certain range of the pile, thereby increasing the bearing capacity of the soil between the piles and reducing the compressibility.
revetment cedar pilesSuitable for use in areas with large changes in groundwater levels or large groundwater corrosion. Generally, the climate in the south is humid and suitable for the use of fir piles.revetment cedar pilesFir wood piles" cannot be replaced with "pine wood piles" or other piles. Many woods will corrode if soaked in water for a long time. They will soon turn black, deform and rot in the water. Especially in the humid south, the water level changes greatly and rot. It's relatively fast, but it's absolutely unusable.

Generally located in the middle of the trunk, wrapped by xylem, it provides nutrients for the growth of saplings and has a short life cycle.
The horizontal resistance of the foundation soil in muddy areas is very small, and overall horizontal displacement is likely to occur when driving the upper ends of the fir pile groups. Therefore, a gravel layer is laid between the fir piles to increase the horizontal stiffness of the pile group as much as possible. Try to place the fir piles one by one. The roots are tightly squeezed. "Fir wood piles" cannot be replaced with "pine wood piles" or other piles. Many woods will corrode if soaked in water for a long time. They will soon turn black, deformed and rotten in the water, especially in the humid south, where the water level changes. It is very large and rots quickly, so it must not be used.
Generally located in the middle of the trunk, wrapped by xylem, it provides nutrients for the growth of saplings and has a short life cycle.
The horizontal resistance of the foundation soil in muddy areas is very small, and overall horizontal displacement is likely to occur when driving the upper ends of the fir pile groups. Therefore, a gravel layer is laid between the fir piles to increase the horizontal stiffness of the pile group as much as possible. Try to place the fir piles one by one. The roots are squeezed tightly.

revetment cedar pilesThe main features are: high strength and low density, with the advantages of light weight and high strength
revetment cedar pilesIf defects are easily visible from the outside, the defective fir piles will not be used for important structures.
revetment cedar pilesThe material is very tough and light, very light, economical and practical. The wood of fir piles is yellowish white, sometimes the heartwood is light reddish brown, soft, delicate, fragrant, straight grain, easy to process, specific gravity 0.38, corrosion resistant It has strong strength and is not eaten by termites. Do not replace "fir wood piles" with "pine wood piles" or other piles. Many woods will corrode if soaked in water for a long time. They will soon turn black, deformed and rotten in water, especially when it is wet. In the south, the water level changes greatly and rots quickly, so it must not be used.
Generally located in the middle of the trunk, wrapped by xylem, it provides nutrients for the growth of saplings and has a short life cycle.
The horizontal resistance of the foundation soil in muddy areas is very small, and overall horizontal displacement is likely to occur when driving the upper ends of the fir pile groups. Therefore, a gravel layer is laid between the fir piles to increase the horizontal stiffness of the pile group as much as possible. Try to place the fir piles one by one. The roots are tightly squeezed. "Fir wood piles" cannot be replaced with "pine wood piles" or other piles. Many woods will corrode if soaked in water for a long time. They will soon turn black, deformed and rotten in the water, especially in the humid south, where the water level changes. It is very large and rots quickly, so it must not be used.

Generally located in the middle of the trunk, wrapped by xylem, it provides nutrients for the growth of saplings and has a short life cycle.
The horizontal resistance of the foundation soil in muddy areas is very small, and overall horizontal displacement is likely to occur when driving the upper ends of the fir pile groups. Therefore, a gravel layer is laid between the fir piles to increase the horizontal stiffness of the pile group as much as possible. Try to place the fir piles one by one. The roots are squeezed tightly.

revetment cedar pilesIssues that need attention when using: Do not replace "fir wood piles" with "pine wood piles" or other piles. Many woods will corrode if soaked in water for a long time, and will soon turn black, deformed and rotten in the water, especially in the humid south. , the water level changes greatly and rots quickly, so it must not be used.