green pole
Detailed description:fir support rod, Tree Support Methods Types and Methods of Artificial Support - Greening Support Rod Wholesale Manufacturers Although tree support is an ancient gardening practice, improvements in a real sense have only happened in recent years. Iron hoops, iron rods, and iron chains are traditionally used. Methods such as these are not beautiful and expensive, have low efficiency and often prevent the flow of sap, which not only fails to achieve the support effect but even causes new decay and death. This article proposes two methods that have achieved good results after practice: Flexibility Support and rigid support. 2. Rigid support - Greening support pole wholesale manufacturer, also known as hard support, is a support method that uses hard materials, such as bolts, nuts, and other supports. This kind of support is both preventive and It is therapeutic and has a fixed effect on transplanting large trees. There are two methods: mutual support of the tree itself and vertical support of the object.
2.1. The trees themselves support each other. 2.1.1. Support of branches: For healthy trees with weak branches and trees with branches that have formed tree holes or splits, install parallel bolts or insert a bolt parallel to each other at the connection between the two branches. Use a screw for artificial support. Carry out wound disinfection during installation.
2.1.2. Split large branch support: Carry out wound disinfection and painting before installing the bolts, and use positioning ropes and pulleys to pull the two large branches together at the appropriate position above the connection point, so that the two large branches are tightly closed. , if necessary, a second bolt can be installed for reinforcement.
2.2. Object vertical support This is a method of using other objects for support. Newly planted trees are easily shaken because their root systems are not deep and thick, especially evergreen trees and deciduous tree species with large crowns, even trees with soil balls. , after planting, it will inevitably be blown by the strong wind, or even knocked over by the wind. The support of the support frame can stabilize the trunk and keep the root system in close contact with the soil, which is conducive to the growth of new roots. Generally speaking, the support of trees is as follows Several ways.
2.3. Benchmark-type support piles: suitable for supporting bare-root trees and street trees after planting. Next to the trees, on the side of the area that faces the wind all year round, use longer and thicker wooden piles or cement piles to drive deeply into the soil. Support piles The height on the ground should be no less than 2 meters, and the supporting stakes should be close to the trunk. Use straw bags, sacks, brown leather or broken straw mats and other soft materials or bamboo slices to wrap the trunk binding parts, and then use iron wire or nylon rope to press "8 "Tie the trees to the supporting piles tightly in the shape of ", and then tie them firmly to the trunks in the middle and lower parts of the supporting piles. This makes the tree trunks stable on the supporting piles and less susceptible to shaking due to external forces. This method requires higher quality of column materials, so The cost is higher.
2.4. Shoulder-type support frame: It is mostly used to support trees with soil balls after planting. Use 2 wooden piles or cement piles to drive into the soil on both sides of the tree trunk that is perpendicular to the wind direction throughout the year. The driving depth is about 1\/3 of the length of the pile. The height of the piles on the ground is about 80-120cm, and the two piles and the tree trunks are located in the same straight line. After the two piles are firmly driven, use the third wooden stick (also known as the pole wood) to tie and fix the tree and the two wooden piles together. Binding It is necessary to wrap the tree trunk with soft materials such as bamboo slices or straw bags, linen sheets, brown bark and other soft materials to prevent friction and damage to the bark. 2. The distance between the piles depends on the size of the tree cavity, and it is required to drive the wooden stakes into the periphery of the tree cavity. In the original soil, it is more stable. Greening support pole wholesale manufacturer
2.5.3 Angle support: This method is often used for trees with soil balls and some precious trees, as well as in places where people move more frequently. Use 3 wooden stakes to drive around the tree at an angle of 120 degrees to each other, and connect the 2 stakes with each other. The wind direction is straight all year round. The height of the upper part of the wooden piles is about 80-120cm, and the depth of the piles is about 1\/3.3 of the pile length. After the piles are stably driven separately, 3 wooden sticks are used to connect and tie the upper ends of each pile securely to form an equilateral triangle. , and surround the trees. Finally, use a wooden stick to tie and fix the trunk with the triangular bracket. The trunk at the tied part is protected with a soft pad. This support method uses more wood and is more expensive.
2.6. Rows of network-shaped supports: After each newly planted large tree is supported and fixed in an appropriate way, in order to increase the firmness of the tree, horizontal bars are often used to fix adjacent trees together to form a network. This is This method is suitable for cultivating large areas and large standard tree supports. Although it requires more materials, it is beautiful, regular and strong.
2.7. Tic-shaped pillars: Tic-shaped pillars have very good stability, but use more materials and are more expensive. They are generally suitable for some larger seedlings. Generally, 4 pillars are erected evenly around the trunk. Slightly tilt toward the trunk, and then use 4 horizontal bars of appropriate length to fix it to the pillar at about 1\/2 of the height of the pillar. Then use 4 shorter horizontal bars on the upper part of the 4 pillars to form a square shape and fix the trunk in the center. In terms of orientation, support materials can be thicker wooden strips or steel materials. Currently, steel materials are mostly used in Guangdong.
