Pine stakes are one of the main products produced and sold by our company. Over the years since its establishment, the company has won the trust of customers with its high-quality products and all-round service quality. In this article, we will introduce to you what you need to pay attention to when using pine stakes. Content.

When using pine wood piles, you need to pay attention to the following:

1. Pine wood piles are made of "logs" and should not be sawn into other shapes, especially not cut in half to form a semicircle. The semicircular pile will soon bend violently, making it impossible to achieve the original use effect.

2. Do not promote "pine piles" as "cedar piles" or other piles. Most common woods are resistant to water and will quickly turn black, deformed and fester in water. This is especially true for fir trees and must not be used. . Of course, there are also other types of wood that can be "soaked in water for thousands of years", such as mahogany.

3. The planning method of pine pile composite foundation is similar to that of ordinary composite foundation, except that the pile center distance is often very small.

4. It is necessary to consider the pile-driving impact force that pine wood piles can withstand. The pile-driving impact energy is within 300kg.m; if it is larger, even logs with a tail diameter of 16cm cannot withstand it.

5. The horizontal resistance of the foundation soil in the silt area is very small, and the upper end of the pine pile group is prone to overall horizontal displacement, causing damage to the above-ground equipment. Therefore, even if the earthquake horizontal load requirements are not considered, a stone layer is usually laid between the pine piles. , try to increase the horizontal stiffness of the pile group as much as possible.

When using pine wood piles, for the sake of its effectiveness, you need to pay attention to the above content to prevent quality problems from occurring during the use of the wood piles and affecting their use.