pine wood pileIt is a wooden pile made of pine wood, mainly used for treating soft foundations, river embankments, etc.pine wood pilePine wood has many advantages. Pine wood is rich in rosin, which can well prevent corrosion by groundwater and bacteria, and is also relatively cheap.pine wood pileSuitable for working below groundwater. It is not suitable for use in areas where the groundwater level changes greatly or the groundwater is highly corrosive.pine wood pile.
usepine wood pileExamples of handling foundations
Weak foundations are common in actual projects. For some building foundations with lower floors and lighter loads or when encountering local hidden ponds, most of them are adopted.pine wood pileTreating the foundation.
Then we are usingpine wood pileWhat should you pay attention to when doing this?
1,pine wood pileIt is made of "logs", so do not saw it into other shapes, especially not saw it in half to make a semi-circle. The semi-circular pile will be strongly bent very quickly and will lose its effectiveness.
2,pine wood pileThe design method of composite foundation is similar to that of ordinary composite foundation, except that the pile center distance is often very small.
3, should be taken into considerationpine wood pileThe pile-driving impact force and pile-driving impact energy it can withstand is within 300kg\/m; if it is any larger, even a log with a tail diameter of 400px cannot withstand it.
4, the horizontal resistance of foundation soil in silt areas is very small,pine wood pileThe upper end of the group is prone to overall horizontal displacement, causing damage to ground facilities; therefore, even if the earthquake horizontal load requirements are not considered, most of them willpine wood pileLay a stone layer in between to raise the horizontal height of the pile group as much as possible. The stone layer can only be laid manually, and it should be as high as possible.pine wood pileSqueeze them one by one.
5The ancients said it well: "Pine wood is dry for a thousand years and wet for a thousand years, and it only takes half a year if it is not dry or wet.pine wood pileThe customary anti-corrosion practice is topine wood pileLightly carbonize the surface, scorch the surface layer with fire, and then apply asphalt. But this method is generally not used now, but it is still a good method for temporary buildings. It is simple, economical, and practical, especially Yes, there is an excavator to cooperate with.pine wood pileIf so, it will be more convenient to carry out construction.
That's itpine wood pileFor some relevant information, if you want to purchase, you can call us for consultation. You are welcome to cooperate with us!
Related News
- What is the principle of bearing capacity of pine piles?
- Application of Beijing fir poles
- The fir tree of the fir tree is actually full of Chinese medicine
- Pine wood piles deal with weak foundation and adapt to conditions
- Pine wood pile driving material to deal with weak foundation and adapt to conditions
- What is the original reason why fir wood piles are dry and cracked?
- Where pine stakes are suitable
- How to store fir wood piles
- Fir wood pile purchasing requirements
- How to drive pine stakes
- Which fir pole wholesaler is reliable?
- How can fir wood piles be preserved longer?
- What are larch stakes?
- Advantages of using fir support poles
- How about using fir support poles for furniture?
- Advantages and Disadvantages of Fir Support Rods
- The design of gabion net used in revetment fir piles 1
- Design of using gabion net on revetment fir wood piles 2
- Why are fir piles suitable for river piling?
- Introduction to larch wood piles