When building a house in the countryside, is it recommended to drive pine wood piles? Let’s take a look with the editor!

1. Construction process of driving pine piles

1. Processing pine wood piles

(1) Saw the top of the pine pile flat. When sawing, it should be sawed according to the planned height (it can be slightly longer).

(2) The small end of the pine stake can be whittled into a 750px long tip.

(3) The pile body must be specially protected during transfer construction, and the pile head can be tied with iron wire.

2. Confirm the pile length

If the piles are too long or too short, the overall effect may be affected. Before piling, you can use wooden piles to test the place to be driven to confirm the length of the wooden piles in each area. The actual pile length is 12.5px longer than the experimental pile. According to the design drawing , Prepare pine piles of required sizes in each construction area, and confirm the pile positions for driving pine piles. Drive pine piles with corresponding pile lengths into the soil according to the pile positions.

(1) If the soil is soft, use the back of the excavator bucket to compact the soil.

(2) After the soil bag is stabilized, you can use the back of the excavator bucket to drive the wooden piles vertically into the bearing layer or use a pile driver to lift the wooden piles into place, and then drive them vertically into the bearing layer manually.

(3) Considering that the upper ends of driven pine piles are prone to horizontal displacement, a stone layer is usually laid between the pine piles for reinforcement.

In summary, it is a good idea to use pine piles for building houses in rural areas. If you also want to use pine piles for piling, you must pay attention to choosing good pine piles. If you need pine piles, please contact our company. , we will serve you wholeheartedly.