Why choose to use anti-corrosion fir pile driving material?River wooden piles?Mainly considered from two aspects: cost and environmental protection.

1. From an alternative perspective, stones, poured concrete, asphalt concrete, mortar block stones, independent concrete block stone paving, etc. are also used to build river ridges. This type not only requires a lot of materials, but also has relatively higher labor costs. , when building, on the one hand, there are requirements for the hardness of the land along the coast. Many environments are not suitable for it. On the other hand, stacking is more troublesome than using anti-corrosion wood to make river piles, and it occupies a smaller area.

In terms of environmental protection, compared with cement, stone, and river wooden piles, they are closer to nature and can be better integrated into them. They also have certain advantages in preventing soil erosion and providing space for aquatic organisms to move. From the perspective of water environment, rivers Wooden piles will not block aquatic plants from absorbing nutrients from the shore soil like stones and cement, and can also provide shelter for lobsters, loaches, or other aquatic animals.

2. As mentioned above, some advantages of river wooden piles, what kind of anti-corrosion wood is generally used?

First of all, from a construction perspective, river wooden piles must be driven into the soil to protect the river slope, so there are certain requirements for the thickness of the anti-corrosion wood. Try to ensure that it is more appropriate to drive wooden piles of more than 10 cm. During the construction process, the excavator , Generally speaking, anti-corrosion wooden piles have flat heads, smooth surfaces, and straight surfaces, so the construction efficiency is at a higher level.

Secondly, from an environmental point of view, river wooden piles have to spend a long time in a humid environment, so they are resistant to decay and have strong stability. Since the project volume of river wooden piles is generally relatively large, the selected anti-corrosion wood must be easy to cut and process. , and the cost should be low, pine wood is more suitable.

The above is all about river wooden piles. Follow this site and there will be articles to share in the future.