Pine piles are very common in construction and are often used for piling and solidifying roadbeds. Pine piles are also used in rivers. Pine piles are needed for structural reinforcement of river embankments. The price of our pine piles is Very cost-effective. Do you know what should be paid attention to when driving pine piles? The following Jiangsu pine pile manufacturer will introduce to you what to pay attention to when driving pine piles.

After piling is completed, the pile heads should be sawn flat according to the designed elevation so that the pile top foundation of each pile is maintained at the same sea level. The sludge squeezed during piling should be excavated and 20-30cm thick graded sand and gravel should be paved on the top of the piles. The cushion layer is compacted in all aspects, and then the base concrete is poured to ensure that part of the load is transmitted to the soil between the piles basically through the cushion layer, and the sharing effect between the piles and soil is adjusted. The cushion layer can be set basically By reducing the pile-soil stress ratio and making full use of the soil between the piles, the value can be increased and the stress on the basic bottom can be reduced. By changing the cushion thickness, the distribution of the pile vertical load is adjusted. The thinner the cushion, the greater the load the piles bear. The higher the percentage of the total load, the opposite is true. If there is no cushion layer, the effect of the soil between the piles cannot be fully exerted.

The above is the relevant content of the matters needing attention when driving pine piles introduced to you by our Jiangsu pine pile manufacturer. If you need to purchase pine piles, please choose the pine piles produced by our Jiangsu pine pile manufacturer. The price of our pine piles is very fair. If you want to know anything about pine piles, you are welcome to call our professional and technical personnel.