Do fir piles need anti-corrosion treatment? Ordinary fir piles do not need anti-corrosion treatment. However, if the foundation is built near water, there may be parts that are often exposed due to changes in water levels, so they must be grilled and carbonized in advance. Because fir piles are being constructed underwater It has very good performance, so it can be used as slope protection piles in river projects and as river bed piles. In some projects that are completely submerged in water, fir piles can last for decades and will not decay.

1. Do underwater fir piles need anti-corrosion treatment?

Because fir piles have good performance in underwater construction, they can be used as slope protection piles in river projects and as river bed piles. In some projects that are completely submerged in water, fir piles can last for decades. They do not It will decay and can be used as a choice for water conservancy projects. At the same time, its price is also very cheap. Most projects will choose this material. Fir piles are a relatively cost-effective choice.

Chinese fir piles can be used as slope protection piles in river projects, or as river bed piles, because fir piles have good underwater working performance, but if you want the fir piles to last longer in the water, you can use some before entering the water. preservative.

We all know that in fact, fir piles themselves have good anti-corrosion properties. When used underwater, as river wood piles, etc., they all have good anti-corrosion properties. So why do we still need to do a good job in the anti-corrosion work of fir piles? Woolen cloth?

It is like this. If used directly as underwater construction or river wooden piles, fir piles will have better anti-corrosion performance. However, because it is not like this, many fir piles are in use, even before construction. It requires a long period of transportation and storage. During this period, in fact, because the fir piles are constantly exposed to sunlight and air, they are more likely to decay. Therefore, when storing and transporting fir piles, you must pay attention to the fir wood. The anti-corrosion of piles, including some watering, the use of chemicals, or the improvement of storage conditions, etc., all need to be done well.

2. How to preserve fir wood piles?

It is mainly used to treat wood piles of about 30 cm that are driven into the soil. Concentrated wood preservatives can be used, which is suitable for treating fir wood piles.

3. Methods for anti-corrosion treatment of fir piles:

When disposing of fir wood piles, the waste liquid is diluted with a 6℅ ratio of concentrated liquid and water, that is, 1 volume of ISUPAR30 concentrated liquid plus 15 volumes of water. Pour the concentrated liquid into water while slowly stirring evenly. When disposing of fir wood piles, follow the instructions Depending on the size of the cross-section, the fir pile material to be processed can be completely soaked in the waste liquid for 1 to 3 minutes, or the method of rinsing or spraying can be used to save the amount of product. This product cannot handle frozen fir piles; the thickness of large fir piles For treatment exceeding 6cm, if it needs to be cut after treatment, the incision must be re-processed. The normal dosage of waste liquid for protective treatment of various types of wood is about 20-30L\/m³, and the cost of protective treatment of different types of wood is slightly different.